Wamkelekile kwiiwebhusayithi zethu!
HDPE TUBE 4 iindlela 12/10mm
Iindlela ezi-4 ze-hdpe
| IiPropati zoMzimba kunye nezoomatshini - I-Micro duct yangaphakathi 12/10mm | |||
| 1 | Inkangeleko ebonakalayo | Ukuhlolwa okubonakalayo | Imbambo ngaphakathi kunye nomphandle ogudileyo wangaphandle, awunamadyungudyungu, umngxuma oshwabeneyo, ukugqabhuka, imikrwelo kunye noburhabaxa. |
| 2 | Idayimitha yangaphandle | I-ANMASPC | 12.0mm ± 0.1mm |
| 3 | Ubunzima bodonga | I-ANMASPC | 1.00mm ± 0.10mm |
| 4 | Ukucocwa kwedayimitha yangaphakathi | Ukuvuthela ibhola yentsimbi | Ibhola yentsimbi eyi-8.5mm inokuvuthelwa ngokukhululekileyo kumbhobho. |
| 5 | I-ovality | I-ANMASPC | ≤ 5% |
| 6 | Uxinzelelo | Imizuzu emi-5 @ 16bar kumbhobho ngamnye | Akukho monakalo kunye nokuvuza |
| 7 | Kink | IEC 60794-1-2 Indlela ye-E10 | ≤ 120mm |
| 8 | Tensile strength | Umlinganiselo wokongezwa: 100mm/min | ≥ 620N |
| 9 | Ukutyumza | Ubude besampuli: 250mm Umthwalo: 380N Ubude bexesha likaMax.umthwalo: 1 min Ixesha lokubuyisela: 1 iyure | Akukho deformation ishiyekileyo > 15% yedayamitha yangaphakathi nangaphandle, iya kuphumelela uvavanyo lwangaphakathi lokucoceka. |
| 10 | Impembelelo | IEC 60794-1-2 Indlela ye-E4 I-1.0J Impembelelo, ixesha lokubuyisela iyure ye-1 | Akukho deformation ishiyekileyo > 15% yedayamitha yangaphakathi nangaphandle, iya kuphumelela uvavanyo lwangaphakathi lokucoceka. |
| 11 | Ukubuyisela ubushushu | 110℃ ～ 23℃, iyure e-1 | ≤ 3% |
| 12 | Min.irediyasi yokugoba | 144mm | Akukho deformation ishiyekileyo > 15% yedayamitha yangaphakathi nangaphandle, iya kuphumelela uvavanyo lwangaphakathi lokucoceka. |
| 13 | Co-efficient of Friction | 750mm Ububanzi, 450 ° loop, 5kg ubunzima | ≤ 0.1 |
| 14 | Umbala kunye noshicilelo | Ukuhlolwa okubonakalayo | Ngokwengcaciso yomthengi |
| Uvavanyo | Uphawu | Indlela yoVavanyo | Iinqobo zokwamkeleka |
| IiPropati zePhysical and Mechanical Properties - iinyanda zetyhubhu | |||
| 1 | Inkangeleko ebonakalayo | Ukuhlolwa okubonakalayo, Isingxobo sangaphandle: Mnyama | Imbambo ngaphakathi kunye nomphandle ogudileyo wangaphandle, awunamadyungudyungu, umngxuma oshwabeneyo, ukugqabhuka, imikrwelo kunye noburhabaxa. |
| 2 | Idayimitha yangaphandle | I-ANMASPC | 35.8mm (± 1.1mm) |
| 3 | Ubungqingqwa bodonga lweSheath | I-ANMASPC | 3.40mm ± 0.20mm |
| 4 | Uxinzelelo | Imizuzu emi-5 @16bar kumbhobho ngamnye | Akukho monakalo kunye nokuvuza |
| 5 | Tensile strength | Umlinganiselo wokongezwa: 100mm/min | ≥ 4600N |
| 6 | Ukutyumza | Ubude besampuli: 250mm Umthwalo: 2000N Ubude bexesha likaMax.umthwalo: 1 min Ixesha lokubuyisela: 1 iyure | Akukho deformation ishiyekileyo > 15% yedayamitha yangaphakathi nangaphandle, iya kuphumelela uvavanyo lwangaphakathi lokucoceka. |
| 7 | Impembelelo | IEC 60794-1-2 Indlela ye-E4 I-10.0J Impembelelo, ixesha lokubuyisela iyure ye-1 | Akukho deformation ishiyekileyo > 15% yedayamitha yangaphakathi nangaphandle, iya kuphumelela uvavanyo lwangaphakathi lokucoceka. |
| 8 | Min.irediyasi yokugoba | 720mm | Akukho deformation ishiyekileyo > 15% yedayamitha yangaphakathi nangaphandle, iya kuphumelela uvavanyo lwangaphakathi lokucoceka. |
| 9 | Umbala kunye noshicilelo | Ukuhlolwa okubonakalayo | Ngokwengcaciso yomthengi |
Iiphakheji ezigqityiweyo ze-HDPE i-micro duct kwi-drum inokugcinwa ngaphandle max.Iinyanga ezi-6 ngomhla wokuveliswa.Ubushushu bokugcina: -40°C ～ +70°C Ubushushu bokufaka: -30°C ～ +50°C Ubushushu bokusebenza: -40°C ～ +70°C
Bhala umyalezo wakho apha kwaye uwuthumele kuthi
